Llama-No-Drama-Free-Crochet-Pattern

There is still time to download: 30 sec.



Thank you for downloading from us :)

If anything:

  • Share this document:
  • Document found in the public.
  • Downloading this document for you is completely free.
  • If your rights are violated, please contact us.
Type of: pdf
Founded: 20.01.2021
Added: 26.01.2021
Size: 0.53 Мб

Find more ideas & inspiration: redheart.com Page 1 of 4
Llama-No-Drama
RED HEART® With Love®: 3
skeins 1303 Aran A and 1 skein
each of 1803 Blue Hawaii B,
1701 Hot Pink C, 1971 Tigerlily
D, 1201 Daffodil E, and 1012
Black F.
Note: Only a small amount of
F is needed.
Susan Bates® Crochet Hooks:
3.75 mm [US F-5] and 8 mm
[US L-11] (for blanket only)
Yarn needle, stitch marker,
two 15mm safety eyes,
stuffing.
GAUGE: Gauge is not
essential for this project.
RED HEART® With
Love® , Art. E400
available in solid
color 7oz (198 g), 370 yd (338
m), multicolor 5oz (141 g), 230
yd (211 m) and stripes 5 oz
(141 g) 223 yds (204 m) skeins
LM6195
crochet
Designed by Nancy Anderson.
What you will need:
BUY YARN
continued... Let’s face it, this llama toy is the
cutest! He’s super huggable and is
ready to brighten up everyone’s day.
Llama toy measures about 14½" [37
cm] tall, measured from bottom of front feet to top of head. Toy measures
about 11" [28 cm] long, measured from
chest to backside (not including tail).
Notes
1. Llama toy is made from pieces: Head
and neck, body, 4 legs, tail, 2 ears, halter, bangs, and blanket.
2. To make head and neck, head is
worked first leaving an opening for neck. Stitches are then worked
around the edge of the neck opening to begin the neck. All other pieces
are worked separately and sewn together, as needed.
3. Smaller hook and single strands of
yarn are used to crochet all pieces
except the blanket. Larger hook and two strands of yarn held together are
used to crochet blanket.
4. Safety eyes are attached before head
is complete. Do not use safety eyes
if making for child under 4 years of
age. Face is completed with simple
embroidery.
5. Gauge is not critical for this project.
Work tightly so stuffing will not show between stitches.
6. To change color, work last stitch of
old color to last yarn over. Yarn over with new color and draw through all loops on hook to complete stitch.
Proceed with new color. Fasten off
old color.
7. Use photograph as a guide for
placement of pieces to be sewn together.
PATTERN STITCH
Fur Stitch
Round 1: Working in front loops only, sc in first st, *ch 10, sc in next st; repeat
from * around. Round 2: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, sc in
each st around.
Round 3: Working in both loops, sc in
each st around. Repeat Rounds 1–3 for Fur Stitch.
Special Technique
Adjustable-ring = Wrap yarn into a ring, ensuring that the tail falls behind the working yarn. Grip ring and tail between middle finger and thumb. Insert hook through center of ring, yarn over (with
working yarn) and draw up a loop. Work
stitches of first round in the ring. After the first round of stitches is worked, pull
gently on tail to tighten ring.
2018 Coats & Clark

Find more ideas & inspiration: redheart.com Page 2 of 4
continued...
Special Stitches
join with sc = Place a slip knot on hook,
insert hook in indicated stitch, yarn over
and draw up a loop, yarn over and draw through both loops on hook.
sc2tog = [Draw up a loop in next st] twice, yarn over and draw through all 3 loops on hook.
HEAD AND NECK
Beginning at muzzle with smaller hook
and A, make an adjustable ring. Round 1 (right side): Work 6 sc in ring—
6 sc. Do not join, work in continuous
rounds (spirals). Place a marker in last
stitch made. Move marker up as each round is completed. Round 2: Work 2 sc in each st
around—12 sc. Round 3: [Sc in next st, 2 sc in next st] 6
times—18 sc. Round 4: [Sc in next 2 sts, 2 sc in next
st] 6 times—24 sc. Round 5: [Sc in next 3 sts, 2 sc in next
st] 6 times—30 sc. Round 6: Sc in each sc around.
Round 7: [Sc in next 4 sts, 2 sc in next
st] 6 times—36 sc. Rounds 8–10: Sc in each sc around.
Round 11: [Sc in next 5 sts, 2 sc in next
st] 6 times—42 sc. Rounds 12 and 13: Sc in each st around.
Round 14: [Sc in next 6 sts, 2 sc in next
st] 6 times—48 sc. Round 15: [Sc in next 7 sts, 2 sc in next
st] 6 times—54 sc. Round 16: Sc in each st around.
Round 17: [Sc in next 8 sts, 2 sc in next
st] 6 times—60 sc. Rounds 18 and 19: Sc in each st around.
Form Neck Opening
Round 20: Ch 15, skip next 15 sts, sc in
next 45 sts—45 sc and 1 ch-15 space. Round 21: Sc in next 15 ch, sc in next 45
sts—60 sc. Rounds 22 and 23: Work Rounds 1 and 2
of Fur Stitch. Round 24: [Sc in next 8 sts, sc2tog] 6
times—54 sc. Rounds 25–27: Work Rounds 1–3 of Fur
Stitch. Rounds 28 and 29: Work Rounds 1 and 2
of Fur Stitch. Round 30: [Sc in next 7 sts, sc2tog] 6
times—48 sc.
Attach Safety Eyes
Flatten head so that neck opening is centered on one side of head. On
other side of head, attach safety eyes between Rounds 15 and 16, about 13-14
sts apart. Stuff head lightly. Head will be stuffed more firmly after neck is
completed. Note: When placing eyes do not snap
washer onto post until satisfied with placement.
Rounds 31 and 32: Work Rounds 1 and 2
of Fur Stitch. Round 33: [Sc in next 6 sts, sc2tog] 6
times—42 sc. Rounds 34 and 35: Work Rounds 1 and 2
of Fur Stitch. Round 36: [Sc in next 5 sts, sc2tog] 6
times—36 sc. Round 37: Work Round 1 of Fur Stitch.
Round 38: Working in remaining (back
loops) only, [sc in next 4 sts, sc2tog] 6
times—30 sc. Round 39: Working in both loops, [sc in
next 3 sts, sc2tog] 6 times—24 sc. Round 40: Work Round 1 of Fur Stitch. Round 41: Working in remaining (back
loops) only, [sc in next 2 sts, sc2tog] 6
times—18 sc. Round 42: Working in both loops, [sc in
next st, sc2tog] 6 times—12 sc. Round 43: Work Round 1 of Fur Stitch.
Round 44: Working in remaining (back
loops) only, [sc2tog] 6 times—6 sc.
Fasten off, leaving a long tail. Thread tail
through the stitches of last round and
pull to gather. Weave in end securely. Facial Features: With F, embroider a "Y"
shaped straight stitch nose and mouth
onto muzzle.
Neck
Round 1: Join A with sc in first ch of
neck opening (Round 20 of body), sc
again in same ch, sc in next 14 ch, 2 sc in next st, sc in next 14 sts—32 sc. Round 2: [Sc in next 7 sts, 2 sc in next
st] 4 times—36 sc. Rounds 3–14: Work Rounds 1–3 of Fur
Stitch 4 times. Fasten off, leaving a long yarn tail for
sewing neck to body.
BODY
Beginning at chest with smaller hook
and A, make an adjustable ring. Round 1 (right side): Work 6 sc in ring—
6 sc. Do not join, work in continuous
rounds (spirals). Place a marker in last
stitch made. Move marker up as each round is completed. Round 2: Work Round 1 of Fur Stitch.
Round 3: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, 2 sc
in each st around—12 sc. Round 4: Working in both loops, [sc in
next st, 2 sc in next st] 6 times—18 sc. Round 5: Work Round 1 of Fur Stitch.
Round 6: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, [sc
in next 2 sts, 2 sc in next st] 6 times—24
sc. Round 7: Working in both loops, [sc in
next 3 sts, 2 sc in next st] 6 times—30
sc. Round 8: Work Round 1 of Fur Stitch.
Round 9: Folding the ch-10 loops
(fur) forward to reveal the sc sts and working in the remaining (back loops)
only, [sc in next 2 sts, 2 sc in next st] 10 times—40 sc.Round 10: Working in both loops, [sc in
next 3 sts, 2 sc in next st] 6 times—50
sc. Round 11: Work Round 1 of Fur Stitch.
Round 12: Folding the ch-10 loops
(fur) forward to reveal the sc sts and working in the remaining (back loops)
only, [sc in next 4 sts, 2 sc in next st] 10 times—60 sc.Round 13: Work Round 3 of Fur Stitch.
Round 14: Work Round 1 of Fur Stitch.
Form Neck Opening
Round 15: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, sc in
next st, ch 18, skip next 18 sts, sc in next
41 sts—42 sc and 1 ch-18 space. Round 16: Working in both loops, sc in
next st, sc in next 18 ch, sc in next 41
sts—60 sc. Rounds 17–19: Work Rounds 1–3 of Fur
Stitch.
LM6195 Llama-No-Drama
2018 Coats & Clark

Find more ideas & inspiration: redheart.com Page 3 of 4
Sew Neck and Head to Body
Insert end of neck into neck opening
of body, matching stitches and making sure that the face and muzzle face forwards. Using long yarn tail from
neck, sew neck securely to body. If
needed, use additional lengths of yarn to reinforce the seam. Weave in ends
securely. Complete stuffing head and neck firmly. Begin stuffing body firmly. Continue to
stuff body as work progresses.
Round 20: Work Round 1 of Fur Stitch.
Round 21: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, [sc
in next 8 sts, sc2tog] 6 times—54 sc.
Round 22: Work Round 3 of Fur Stitch.
Rounds 23–58: Work Rounds 1–3 of Fur
Stitch 12 times. Round 59: Work Round 1 of Fur Stitch.
Round 60: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, [sc
in next 7 sts, sc2tog] 6 times—48 sc.
Round 61: Working in both loops, [sc in
next 6 sts, sc2tog] 6 times—42 sc. Round 62: Work Round 1 of Fur Stitch.
Round 63: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, [sc
in next 5 sts, sc2tog] 6 times—36 sc.
Round 64: Working in both loops, [sc in
next 4 sts, sc2tog] 6 times—30 sc. Round 65: Work Round 1 of Fur Stitch.
Round 66: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, [sc
in next 3 sts, sc2tog] 6 times—24 sc.
Round 67: Working in both loops, [sc in
next 2 sts, sc2tog] 6 times—18 sc. Round 68: Work Round 1 of Fur Stitch.
Finishing stuffing body firmly. Round 69: Folding the ch-10 loops (fur)
forward to reveal the sc sts and working in the remaining (back loops) only, [sc
in next st, sc2tog] 6 times—12 sc.
Round 70: Working in both loops, [sc in
next st, sc2tog] 4 times—8 sc. Round 71: Work Round 1 of Fur Stitch.
Fasten off, leaving a long tail. Thread tail
through the stitches of last round and
pull to gather. Weave in end securely.
LEGS (make 4)
Beginning at bottom of foot, with
smaller hook and A, make an adjustable ring. Round 1 (right side): Work 6 sc in ring—
6 sc. Do not join, work in continuous
rounds (spirals). Place a marker in last
stitch made. Move marker up as each round is completed. Round 2: Work 2 sc in each st
around—12 sc. Round 3: [Sc in next st, 2 sc in next st] 6
times—18 sc. Round 4: [Sc in next 2 sts, 2 sc in next
st] 6 times—24 sc. Round 5: [Sc in next 3 sts, 2 sc in next
st] 6 times—30 sc. Rounds 6–13: Sc in each sc around.
Rounds 14–25: Work Rounds 1–3 of Fur
Stitch 4 times. Fasten off, leaving a long yarn tail for
sewing leg to body. Repeat to make a total of 4 legs.
TAIL
With smaller hook and A, ch 7. Round 1: Sc in 2nd ch from hook and in
next 4 ch, 2 sc in last ch; rotate piece to
work along opposite side of foundation
ch, sc in next 5 ch—12 sc. Do not join, work in continuous rounds (spirals). Place a marker in last stitch made. Move
marker up as each round is completed. Round 2: Sc in each st around.
Rounds 3–14: Work Rounds 1–3 of Fur
Stitch 4 times. Rounds 15 and 16: Work Rounds 1 and 2
of Fur Stitch. Round 17: Working in both loops, sc in
next st, [sc2tog] twice, sc in next 3 sts,
2 sc in each of next 2 sts, sc in next 2
sts—12 sc. Rounds 18–23: Repeat Rounds 15–17
twice. Rounds 24–26: Work Rounds 1–3 of Fur
Stitch. Fasten off leaving a long yarn tail for
sewing tail to body.
EARS (make 2)
With smaller hook and A, leaving a long beginning tail, ch 19; join with slip st in
first ch to form a ring. Round 1: Skip join, sc in next 18 ch—18
sc. Do not join, work in continuous rounds (spirals). Place a marker in last
stitch made. Move marker up as each round is completed. Rounds 2–6: Sc in each sc around.
Round 7: [Sc2tog, sc in next 7 sts]
twice—16 sc. Round 8: Sc in each sc around.
Round 9: [Sc2tog, sc in next 6 sts]
twice—14 sc. Round 10: Sc in each sc around.
Round 11: [Sc2tog, sc in next 5 sts]
twice—12 sc. Round 12: [Sc2tog, sc in next 4 sts]
twice—10 sc. Round 13: [Sc2tog, sc in next 3 sts]
twice—8 sc. Round 14: [Sc2tog] 4 times—4 sc.
Fasten off, leaving a long tail. Thread tail
through the stitches of last round and pull to gather. Weave in end securely.
Do not weave in beginning tail, it will be used to sew ear to head. Repeat to
make a total of 2 ears.
BANGS
With smaller hook and A, ch 10 Fasten off, leaving a yarn tail on both
ends. Cut about twenty 3" [7.5 cm] lengths
of A. With smaller hook and 2 lengths held together and beginning in first ch,
*insert hook in next ch, place yarn over head of hook and draw halfway through
chain to form a loop. Thread ends of lengths through loop and pull to tighten.
Repeat from * across chain until desired
fullness is achieved. With yarn needle,
carefully separate the plies to add fluffiness to the bangs.
HALTER
Noseband: With smaller hook and B, ch
30; join with slip st in first ch to form a ring. Note: This part of the halter is placed around the llama's muzzle. Head Strap: Ch 49. Note: This part
of the halter forms the strap that fits around the llama's head.
Try halter on for size and adjust as needed. Join the end of the head strap
with a slip st in the opposite side of the noseband circle. Fasten off, knotting the yarn end
securely. Do not trim ends.
Working in front loops only, join C with slip st in first ch of noseband, slip st in
each ch of noseband and head strap. Fasten off, leaving a yarn tail. Tie
LM6195 Llama-No-Drama
continued...
2018 Coats & Clark

Find more ideas & inspiration: redheart.com Page 4 of 4
beginning and ending yarn tails
together to secure.
Tassels (make 3 – 1 each with B, C, D )
Wrap yarn 10 times around two
outstretched fingers. Slip wraps off fingers and insert one of the yarn ends
on the halter into the loops (for top
of tassel) and tie securely to attach. Securely tie a length of contrasting
color yarn around the wraps about ½" [1.5 cm] from top. Cut and trim loops at bottom of tassel. Repeat to make and
attach a total of 3 tassels to halter.
BLANKET
Row 1: With larger hook and 2 strands
of B held together, leaving a 4-5" [10– 12.5 cm] beginning tail, ch 26. Fasten off, leaving a 4–5" [10–12.5 cm] ending tail.
Continue to leave 4–5" [10–12.5 cm] beginning and ending tails on all rows.
These tails will be used later to create the braided fringe.Row 2: TURN, working in front loops
only, join B with slip st in first ch, slip st in each remaining ch across and fasten
off. Row 3: TURN, working in front loops
only, join C with slip st in first st, slip st in each remaining st across and fasten
off. Rows 4–22: Repeat Row 3 working 1 row
each in the following color sequence: [D, E, B, C] 4 times, E, D, and C (or in any
color sequence you prefer). Rows 23 and 24: With B, repeat Row 3
twice.
Treating the 2 strands of yarn held together as 1 strand, make fringe along blanket edges by braiding each group of
3 strands. Braid for about 2" [5 cm] or as desired and then tie off with a scrap
of yarn. Time ends to form a small tassel.
Blanket Ties (make 2)
Join B with slip st in any corner of blanket, ch 40. Fasten off, leaving a yarn
tail. Repeat to attach and make a tie on
the opposite corner. With D, make and
attach tassels, to the end of each tie, in same way as tassels were made and
attached to halter.
FINISHING
Sew Legs to Body
Notes
1. Sew front legs to bottom of body
directly under would-be shoulders of llama (about Round 20 of body).
2. Sew back legs to bottom of body
at imaginary hip area, before the
decrease rounds.
3. Push the Fur Stitch rounds out of the
way to access sc rounds. Sew legs
onto sc rounds.
4. Legs are sewn side-by-side with
edges touching.
Stuff one leg firmly. Flatten top edge of leg and, with yarn needle and attached
long yarn tail, sew top edges together.
Then sew leg to body. Repeat to sew all 4 legs to body.
Sew Tail to Body
Do not stuff tail. With yarn needle and long yarn tail, sew end closed and sew
to upper rear end of llama.
Sew Ears to Head
With yarn needle and long yarn tail, sew ears to top of head about 2" [5
cm] apart. Note: Push the Fur Stitch rounds out of the way to access sc
rounds. Sew ears onto sc rounds.
Sew Bangs to Head
Fold back the first row of Fur Stitch
along top of head. With yarn needle
and yarn tails, sew bangs to head, along
entire length of strip.
Tie blanket around neck and place halter on head.
Weave in and trim any remaining ends.
ABBREVIATIONS
A, B, C, D, E, and F = Color A, B, C, D, E, and F; ch = chain; sc = single crochet;
LM6195 Llama-No-Drama
2018 Coats & Clark