Amigurumi Doll Sofia Free Pattern - amigurumi.myeatbook.com

There is still time to download: 30 sec.



Thank you for downloading from us :)

If anything:

  • Share this document:
  • Document found in the public.
  • Downloading this document for you is completely free.
  • If your rights are violated, please contact us.
Type of: pdf
Founded: 08.01.2021
Added: 26.01.2021
Size: 2.45 Мб

Amigurumi Doll
Admin 3 MaV0 Yorum Y apılmamış
Amigurumi Doll Sofia Free Pattern
Doll Sofia
Home Amigurumi Doll Amigurumi Doll Sofia Free Pattern

Materials and tools:
– ALIZE – 50 g (300 m / 50 g).
– Yarn for clothing sweets online (white DUQJ,
green DUQJ)
– DUQIRUSLOORZVDSSUR[JEDE HimalaDQGROSKLn
100g / 100m
– hook 1.5 mm.
– filler
– Pins with disks with a diameter of 15 mm
– EHODVKHVSDVWHOFUDons for toning.

– glue
– 1 needle, 1 button
abbreviation:
Sc – single crochet
Ch –air loop
Dec – decrease
İnc – increase
Dc double crochet
Hdc half crochet
(…) x repeat x number of times
Sleeping doll Sofia. She sees
colorful and good dreams like children in
all over the world. That is whou do not want
open RXUHes earlLQWKHPRUQLQJ.
The doll size is 15 cm at
use of these materials.
The head is attached to the body
cotter pin that allows the doll to rotate
the head.
A few tips:
– When crocheting, I alwaVXVHWKHVPDOOHVWVL]HRIWKHKRRNWKDWLVLQGLFDWHGRQWKe
threads. For instance,
if a 3mm hook is recommended, I use a 1.5mm hook. This avoids large holes in the
canvas, the doll
becomes more accurate again.

1. All parts are connected in a spiral. This means that the round will not be completed
b6P.
2. Use a marker . A small thread (a dif ferent color than RXUZRUNWKUHDG ZLOOKHOSou
count the number of rows.
Just place it at the beginning of the row on top of the thread.
HEAD
1.6 Sc in the Magic ring.
2. 6İnc = 12
3. (1Sc, 1 İnc) x6 = 18
4. (2Sc, 1 İnc) x6 = 24
5. (3Sc, 1 İnc) x6 = 30
6. (4Sc, 1 İnc) x6 = 36
7. (5Sc, 1 İnc) x6 = 42
8. (6Sc, 1 İnc) x6 = 48
9. (7Sc, 1 İnc) x6 = 54
10. (8Sc, 1 İnc) x6 = 60
11-16. = 60Sc
17. 20Sc, (1 İnc, 1Sc) x3, 3Sc, 3 Dc 1 loop in 1 loop (this will be the nose), 3Sc, (1Sc,
1 İnc) x3, 21Sc = 66 See photo below .
18.20Sc, (1 İnc, 2Sc) x3, 3Sc, 1Dec, 2Sc (2Sc, 1 İnc) x3, 19Sc, 1 Dec = 70
19-23. = 70Sc
24.20Sc, (1 Dec, 2Sc) x3.1 Dec, 2Sc, 1Dec (2Sc, 1 Dec) x3, 20Sc = 62
25.1Dec, 18Sc, (1 Dec, 1Sc) x3.4Sc, (1Sc, 1 Dec) x3, 18Sc, 1 Dec = 54
26. (7Sc, 1 Dec) x6 = 48
27. (6Sc, 1 Dec) x6 = 42
28. (5Sc, 1 Dec) x6 = 36
29. (4Sc, 1 Dec) x6 = 30
30. (3Sc, 1 Dec) x6 = 24 Fill
31. (2Sc, 1 Dec) x6 = 18
32. (lSc, 1 Dec) x6 = 12
Place the metal disk on the cotter pin, then install the wooden disk. Install the cotter pin
with the disks in the head and
fasten it. The cotter pin itself should be outside, as RXFDQVHHLQWKHSKRWREHORw .

33. 6 Dec, pull, thread cut and close
BODY
1. 6 Sc in the Magic ring, put the marker.
2. 6İnc = 12
3. (1Sc, 1 İnc) x6 = 18
4. (2Sc, 1 İnc) x6 = 24
Pass the cotter pin through the middle of the case, insert a wooden disc, then a metal
disc, bend the cotter pin and fasten
with his pliers.
5-6.24Sc
7. (3Sc, 1 İnc) x6 = 30
8. = 30Sc
9. (4Sc, 1 İnc) x6 = 36 10-11. = 36Sc
12.12Sc, (lSc, 1 İnc) x6, 12Sc = 42
13. (1Sc, 1İnc) x3, 9Sc, (2Sc, 1İnc) x4, 9Sc, (1Sc, 1 İnc) x3 = 52
14.1İnc, 50Sc, 1İnc = 54
15-21. = 54Sc
22. (7Sc, 1 Dec) x6 = 48
23. (6Sc, 1 Dec) x6 = 42
24. (5Sc, 1 Dec) x6 = 36
25. (4Sc, 1 Dec) x6 = 30
26. (3Sc, 1 Dec) x6 = 24
27. (2Sc, 1 Dec) x6 = 18 fill
28. (1Sc, 1 Dec) x6 = 12
29. 6 Dec, close, cut the DUQDQGKLGHWKHHQG.
HANDS (2PCS)
Knitted chain 6 Ch, from the second loop from the hook
1.4Sc, 2Sc in 1 loop, on the back of the chain, 4Sc, 2Sc in 1 loop (12)
2.12Sc
3. Use, 4Sc in 1 loop (15)
4. Use 4Sc together (12)

5.10Sc, 1 Dec (11)
6.4Sc, 1 Dec, 5Sc (10)
7.4Sc, 1 Dec, 4Sc (9)
8.1 İnc, 3Sc, 1 İnc, 4Sc (1 1)
9-19. 11Sc fill the hand
20. 5 Dec, lSc close, cut the DUQDQGKLGHWKHHQG.
LEGS (2PCS)
Start crocheting from the foot.
Chain 6 Ch, with 2 hook loops
1.4Sc, 2Sc in 1 loop, on the other side of the chain, 4Sc,
2Sc in 1 loop (12)
2.4Sc, 2 İnc, 6Sc (14)
3- 5.14Sc
6.1 Dec, 4Sc, 1 Dec, 6Sc (12)
7-10. 12Sc fill.
11.6 Dec
Pull the hole in the heel, trim the DUQDQGKLGHWKHHQG.
Then crochet along the foot up.
1. Knit along the foot 16 Sc in a circle,
as RXFDQVHHLQWKHSKRWo
See the photo.
2-13.16Sc
14.7Sc, 1 İnc, 7Sc, 1 İnc (18)
15-17. 18Sc fill legs
18. (lSc, 1 Dec) x6 (12)
19.6 Dec
close, cut the DUQDQGKLGHWKHHQG.

Ears

1. 6 Sc in the magic ring, a thread. Sew
ears between 14 and 16 rows.
Sew hands and feet. Sew hands between 4 and 5
in rows, sew legs between 20 and 21 rows
ASSEMBLY
EHFXUOHr
Find places to pull RXUHes between the 15th and 16th rows.
Step 2 stitches to the right and left of the nose for each eH.
For the left eHRIWKHSDLULQVHUWWKHQHHGOHQHDUWKHQHFNDQGSXOOLWRXWEHWZHHQWKe
15th and 16th rows, stepping
2 stitches to the right of the nose. Sew 3 more stitches to the right and pull the needle
back to the bottom
neck.
Do not pull the thread right now! Repeat for the right eHEXWJROHIW.
Now RXFDQSXOOWKHWKUHDGEXWQRWYHU much! T ie, hide the thread.
Mouth tightening
In the place of eHH[WHQVLRQEHWZHHQWKHWKDQGWKURZV ou can start as with
go
eHVDQGIURPWKHOHIWHe) insert the needle and take it out in the 22 row , parallel to
the nose,
make 2 stitches, insert the needle and pull it back into the eHVE pulling.
Make a knot, hide the threads. Repeat with the second eHWo
maintain eHVmmetry.
We knit a sponge.
Tie the hook
ohm 5 ch sew in
22 row as shown
Pulling the navel and bottom
backs.
Insert the needle into the center of the abdomen and pull it out in the back
parts. Go down, insert the needle between RXUOHJVDQd
pull it back to the top of the backside.

Repeat twice, fasten, trim the DUQDQd
hide the thread.
The doll has eHVHPEURLGHUWZROLQHVIRUWKHHes and glue the eHODVKHV.
Climb 3 rows up and embroider eHEURZV.
Wig
Attach hair as usual, like a fringe. Cut hair to the required length, approx. 20 cm and
attach them
around the head and at the top of the head. Divide RXUKHDGLQWRWZRSDUWV,
attach hair along the part. With the same thread, make several
seams along the head so that there are no emptVSRWVLQWKHKDLr. See the photo
below.
You can split each thread into two parts using a needle to
the hairstOHORRNHGPRUHLQWHUHVWLQJ0DNHSRQtails
Make tinted cheeks.
T rousers
Each row starts with 1 Ch and ends with the joint venture.
1 part: we collect a chain of 24Ch, connect in a circle and
we knit 24Hdc
1. change color to white, 24Sc
2. change color to green, 24Hdc
3. change color to white, 24Sc
4. change color to green, 24Hdc
5. change color to white, 24Sc
2 part: we collect a chain of 24Ch, connect in a circle and knit
24Hdc
1. change color to white, 24Sc
2. change color to green, 24Hdc
3. change color to white, 24Sc
4. change color to green, 24Hdc
5. change color to white, 24Sc
We knit another 5Ch to connect the parts.

Combine
1.24 Hdc in the first part, 5 Hdc in the chain, then 24 Hdc in the 2nd part, 5
Hdc Chain (58)
2.4.6.8.10.12 rows 58 Sc
3.5.7.9.11 rows 58 Hdc
Fasten, trim the DUQDQGKLGHWKHHQG.
We knit a chain of 105 Ch for the lace, insert it into the pants.
Blouse
We collect a chain of 35 Ch,
with 3 loops from the hook:
1.6Hdc, 3Hdc in 1 loop, 5Hdc, 3Hdc in 1 loop, 7Hdc, 3Hdc in 1 loop, 5Hdc, 3Hdc in 1
loop, 6Hdc (41) turn
2.1Ch, 7Sc, 3Sc in 1 loop, 7Sc, 3Sc in 1 loop, 9 se, 3Sc in 1 loop, 7Sc, 3Sc in 1 loop,
7Sc (49)
turn.
3.2CH, 8Hdc, 3Hdc in 1 loop, 9Hdc, 3Hdc in 1 loop, 1 1Hdc, 3Hdc in 1 loop, 9Hdc,
3Hdc in 1 loop, 8Hdc (57)
turn
4.1Ch, 9Sc, 3Sc in 1 loop, 11Sc, 3Sc in 1 loop, 13 se,
3Sc in 1 loop, 11Sc, 3Sc in 1 loop, 9Sc (65) rotation
5.2CH, 10Hdc, skip 13 loops for the sleeve, 19Hdc, skip 13
hinges for a sleeve, 10Hdc (39) turn
6. Ch, 10Sc, 1 İnc, 17Sc, 1 İnc, 10 Sc (41) turn
7. 2Ch, 1 Hdc, 1İnc, skip 1 loop, 9Hdc, 3Hdc in 1 loop, 17Hdc,
3Hdc in 1 loop, 1 1Hdc (45) rotation
8.1ch, 45Sc rotation
9.2Ch, 12Hdc, 3Hdc in 1 loop, 19Hdc, 3Hdc in 1 loop, 12Hdc (49) rotation
10.1Ch, 13Sc, 3Sc in 1 loop, 21Sc, 3Sc in 1 loop, 13Sc (53)
Finish, cut and hide the thread. Sew a button.
Pillow
We dial 16Ch, with 2 loops from the hook
1.15Sc, rotation
2-33. 1Ch, 15Sc, rotation

Fold in half and sew along the edges, fill a little.
DOLL IS READY !!